Source Technologies ST9720 - Page 50

Error Message
on Display
Printed
Message
Description Action
Purge Audit
Report, Then
Format
An SFF command was
received, but there is
audit data in flash
which should not be
erased
Purge the audit data, then
resend the SFF command
Secure File Not
Unlocked/Opene
d/Written/Read
There was an internal
error while trying to
access Flash for an
STL or STP command
Print the menus to ensure
that Flash is installed.
Print a directory of Flash
to ensure that is it not
write protected or full. If
error occurs on STP
command, check to
confirm that the resource
is stored in Flash.
Error Messages | 8
Source Technologies, LLC ST9720 Secure MICR Printer User’s Guide
46