EasyManua.ls Logo

Southbend EZ18-3 - User Manual

Southbend EZ18-3
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this
manual for the life of the equipment:
Model #:
Serial #:
Date
Purchased:
OPERATOR’S MANUAL
Electric, Counter Steamer
EZ18-3 EZ18-5
! WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property
damage,
injury or death. Read the installation, operating and maintenance instructions thoroughly
before
installing or servicing this
equipment.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
www.southbendnc.com
MANUAL 1195733 REV0 (11/22/2011)
HEAVY DUTY STEAM

Questions and Answers

  • M
    Melissa ThomasAug 19, 2025
    What to do if my Southbend EZ18-3 Electric Steamer steams continuously without the cooking or ready light on?
    • M
      Matthew KingAug 19, 2025
      If your Southbend Electric Steamer is steaming continuously without either the cooking or ready light being on, it could be due to: * A faulty thermostatic switch, which would require replacement. * The power switch being set to 'continuous steam'. This is normal when 'continuous steam' is selected.
  • S
    Sarah YoungAug 27, 2025
    What to do if the buzzer doesn't sound at the end of the timer setting on my Southbend Electric Steamer?
    • S
      Sarah MayoAug 27, 2025
      If the buzzer fails to sound at the end of the timer setting on your Southbend Electric Steamer, the following could be the cause: * Faulty timer contacts: Consider replacing the timer. * A faulty buzzer: The buzzer may need to be replaced. * Faulty wiring: Inspect the wiring and ensure all connections are tight, correcting any issues found.
  • S
    Stephen GutierrezSep 3, 2025
    How to fix a timer dial that is not turning on my Southbend EZ18-3 Electric Steamer?
    • C
      cordovalynnSep 3, 2025
      If the timer dial on your Southbend Electric Steamer isn't turning, it could be due to: * A faulty timer motor, which would require replacing the timer. * Faulty wiring. Inspect the condition of the wiring and ensure all connections are tight; correct as needed.
  • A
    Andrew SimmonsNov 11, 2025
    What to do if the cooking indicator light fails to light on my Southbend EZ18-3 Electric Steamer?
    • T
      Tara JohnsonNov 11, 2025
      If the cooking indicator light on your Southbend Electric Steamer doesn't illuminate when the timer is set, several factors could be responsible: * The main power circuit breaker might have tripped. Check the external circuit breaker for the incoming power and switch it to the ON position. * The door interlock switch contacts may not be closed. Ensure the cooker door is fully shut to close the switch contacts and verify the door's alignment with the switch. * The door interlock switch itself could be faulty, requiring replacement. * The indicator light might be burned out and need replacing. * The timer contacts could be faulty, necessitating timer replacement. * There may be faulty wiring. Inspect the wires and connections, correcting as needed. * A fuse might have blown, r...

Southbend EZ18-3 Specifications

General IconGeneral
ModelEZ18-3
TypeElectric Steamer
Number of Compartments3
PowerElectric
ConstructionStainless Steel
Voltage208/240
FeaturesAdjustable

Related product manuals