Southbend G-24 User Manual

IMPORTANT
FOR FUTURE REFERENCE
Please complete this information
and retain this manual for the life
of the equipment.
MODEL #
SERIAL #
DATE PURCHASED
OWNER'S MANUAL
INSTALLATION
USER'S GUIDE
SERVICE
PARTS
COUNTER GRIDDLE
MODELS: SG-24, SG-24E; SG-36, SG-36E
SG-48, SG-48E; SG-60, SG-60E
SG-72, SG-72E
WARNING: Improper installation, adjustment, alteration, service
or maintenance can cause propertydamage, injury or death . Read
the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment.
1100 Old Honeycutt Road • Fuquay, NC 27526 • (919) 552-9161 • FAX (919) 552-9798 • (800) 348-2558
Middleby Corp. Service Hot Line (800) 238-8444
COUNTER GRIDDLE
(Manual Section BP)
$9.00

Southbend G-24 Specifications

General

Model	G-24
Type	Griddle
Width	24 inches
BTU	60, 000 BTU
Gas Type	Natural Gas or Propane
Material	Stainless Steel
Cooking Surface Material	Stainless Steel
Overall Dimensions	24" W x 30" D x 12" H
Voltage	Not Applicable
Power	Not Applicable

Summary

Installation

General Installation Requirements

Covers local codes, gas type, grounding, and pressure requirements for safe installation.

Clearances and Safety Distances

Specifies minimum clearances from combustible and non-combustible materials for safety.

Stand Assembly and Mounting

Step-by-step guide for assembling optional stands and mounting the griddle unit.

Gas Connections and Ventilation

Details gas supply connection, optional connections, and exhaust system requirements.

User's Guide

Limited Warranty Information

Details the warranty terms, conditions, exclusions, and service procedures.

Counter Griddle Features and Specifications

Overview of standard features, capabilities, and technical data for the griddle.

Pilot Lighting and Burner Operation

Step-by-step instructions for igniting pilots and operating the main burners.

Griddle Maintenance and Cleaning

Procedures for initial griddle tempering, cleaning, and care.

Service

Adjustments and Thermostat Calibration

Guides for adjusting pilot flames, burner air, and calibrating temperature controls.

Troubleshooting Common Problems

Identifies common issues with units, burners, and pilots, and their solutions.

Parts

Replacement Parts Identification

An index of replacement parts with references to detailed lists and visual breakdowns.

Wiring Diagram for Spark Ignition

Electrical schematic for spark ignition models, showing component connections.