EasyManua.ls Logo

Southbend SGS-24E User Manual

Default Icon
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MANUAL 1182629 REV 2
$9.00
COUNTER GRIDDLE
MANUAL SECTION BR
OPERATOR’S MANUAL
Counter Griddle
Model Numbers
SGS-24 SGS-24E
SGS-36 SGS-36E
SGS-48 SGS-48E
SGS-60 SGS-60E
Model SGS-48 Shown
! WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage,
injury or death. Read the installation, operating and maintenance instructions thoroughly before
installing or servicing this equipment.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(800) 348-2558 or (919) 552-9161 FAX (800) 348-2558 or (919) 552-9798
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this
manual for the life of the equipment:
Model #: __________________________
Serial #: __________________________
Date Purchased: ___________________
Question and Answer IconNeed help?

Do you have a question about the Southbend SGS-24E and is the answer not in the manual?

Southbend SGS-24E Specifications

General IconGeneral
ModelSGS-24E
CategoryGriddle
TypeGas Griddle
Width24 inches
Cooking Surface24 x 20 inches
Power30, 000 BTU
Control TypeManual
MaterialStainless Steel
Gas TypeNatural Gas or Propane
BTU30, 000 BTU

Summary

Specifications

Gas Supply Requirements

Details on gas type, pressure, and supply line requirements for safe operation.

Installation Clearances

Recommended minimum clearances from combustible and non-combustible materials.

Installation

Connecting the Gas Supply

Step-by-step guide for connecting the gas line, regulator, and leak testing.

Final Checks and Initial Operation Setup

Positioning, leveling, clearance, ventilation checks, and pilot/burner operation.

Operation

Lighting the Pilots

Step-by-step guide to light pilot flames for burner ignition.

Adjustments

Manifold Gas Pressure Check

Procedure to verify manifold gas pressure using a manometer.

Thermostat Calibration

Procedure to calibrate thermostatic valves for accurate temperature control.

Troubleshooting

Common Griddle Issues and Solutions

Identifies common problems like no heat, carbon deposits, and pilot issues with causes.

Related product manuals