To Next PageTo Next Page
Need help?Do you have a question about the Southwire 31040S and is the answer not in the manual?
General| Model | 31040S |
|---|---|
| Brand | Southwire |
| Type | Infrared Thermometer with Probe |
| Resolution | 0.1°F/°C |
| Power Source | 9V Battery |
| Distance to Spot Ratio | 12:1 |
| Laser Targeting | Yes |
| Auto Power Off | Yes |
| Response Time | 500 ms |
| Display | LCD |
| Temperature Range | -58°F to 1022°F (-50°C to 550°C) |
| Emissivity | Adjustable from 0.10 to 1.00 |
Describes the function of the Up, Down, and MODE buttons for controlling meter settings and operations.
Details the various icons and readings displayed on the LCD screen, including data hold, laser, and temperature.
Instructions on how to switch between Fahrenheit (°F) and Celsius (°C) using the slide switch.
Explains how to use the MODE button to access Emissivity (EMS), LOCK, High Alarm (HAL), and Low Alarm (LOW) settings.
Details how the MAX reading shows the highest temperature recorded between trigger pulls.
Defines emissivity and provides a table for adjusting values based on material types for accurate measurements.
