What to do if Southwire Construction Equipment bender operates in only one direction?
If your Southwire Construction Equipment bender operates in only one direction, the pendant cord may be defective. Use an ohmmeter to check for a broken wire and replace the pendant cord if necessary.
General| Product Type | Electric Conduit Bender |
|---|---|
| Model | BML-2000 |
| Manufacturer | Southwire |
| Maximum Bending Angle | 90 degrees |
| Maximum Conduit Size (EMT) | 2 inch |
| Power Source | Electric |
| Voltage | 120V |
| Bending Shoe Included | Yes |
| Material | Steel |
| Color | Red |
| Maximum Conduit Size (IMC) | 1-1/2 inch |
Identifies the product model and type for which the manual provides instructions.
Details precautions related to electric shock, including cord inspection and proper grounding.
Covers essential safety practices like wearing safety glasses, maintaining guards, and proper tool usage.
Provides guidelines for using extension cords safely, specifying gauge, length, and condition.
Details how to select the correct shoe and roller, and warns against overbending.
Stresses the importance of inspecting the bender for wear or damage and using genuine replacement parts.
Reinforces warnings about electric shock, emphasizing proper plug use and connection to grounded circuits.
Details crucial safety steps for forklift transport, including brake engagement and fork placement.
Reiterates guidelines for safe extension cord use, specifying gauge, length, and plug type.
Explains how to adjust the squeeze pressure for different conduit types to ensure proper seating.
Instructs on preparing for bending, including engaging the power and setting the fixed rigid rollers.
Outlines the step-by-step procedure for bending various types of conduit, including roller adjustments.
Explains the terms of the five-year and one-year limited warranties for the equipment and its components.
Provides instructions on how to obtain warranty service, including contact information and procedures.
To Next Page
