16
Usage
Clearing a blockage
Clearing a blockage, reversing, sharpening or replacing the
blade
Before starting to service or clean the unit, turn it o,
disconnect the power plug and wait until the blade comes
to a standstill.
20191817
• Check that the power plug is removed from the mains
supply.
• Unscrew the housing interlock
9
.
• Tip forward the front part of the shredder housing. You
can remove it completely and put it aside.
• You now have full access to the blade
20
.
• Remove the blockage or remove the blade.
4
9
To Next Page
Loading...
