18
Maintenance and cleaning
General cleaning and servicing
Maintenance
Wear hand protection when working on the blade.
Before starting to service or clean the unit, turn it o, pull
the power plug and wait until the blade stops. Otherwise
there is a risk of injury from electric shock, re and
rotating blade.
Do not spray water onto the shredder.
Electric shock hazard.
• Always keep the shredder, wheels and air vents clean. Use a
brush or cloth to clean it, avoid using cleaners and solvents.
• Always check the shredder, especially the guards to
ensure they are not worn down or damaged, and rmly
attach before use.
• Check that the nuts, bolts and screws are tight.
• Check the covers and guards for damage and improper
attachment. If necessary, change the components.
• Keep the shredder in a safe, dry place out of children’s
reach. Do not cover the shredder in nylon bags, as
moisture may develop.
To Next Page
Loading...
