To Next PageTo Next Page
Need help?Do you have a question about the Soyal AR-321H and is the answer not in the manual?
Steps for installing the AR-321H and AR-331H touch-panel metal housing controllers.
Steps for installing the AR-721H access control unit.
Steps for installing AR-725H, AR-725H-M, and AR-725X controllers.
Steps for installing the AR-757H access control unit.
Wiring and pin assignments for AR-321H and AR-331H models.
Wiring and pin assignments for the AR-721H model.
Wiring and pin assignments for the AR-725H model.
Wiring and pin assignments for the AR-757H model.
Diagrams for connecting electric locks, bolts, and strikes.
Diagrams for connecting readers and door sensors.
Diagrams for network connections and AR-721RB security.
Diagrams for access control and arming tool connections.
Instructions for using an external WG keyboard for system programming.
Procedures for managing tags in different operational modes.
Steps for entering and exiting the system's programming mode.
Procedures for modifying master code, setting Node ID, and selecting modes.
Settings for passwords, dual door control, and anti-pass-back.
Configuration for auto open time zones and lift access control.
Setting up arming conditions and applications for alarms.
Reference for default settings of various controller functions.
Instructions for performing a factory reset on the controller.
Commands for entering/exiting programming, setting modes, and IDs.
Commands for time settings, access modes, and arming.
Commands for tag management, lift control, and other functions.
General
