LEXI | 11
4. Turn the device on
- Press the power button to turn on the device, the display and icon “ ”
will light and the cooling fan start working.
5. Select manual or automatic mode
- The default startup is manual ash mode, long press the ash button
to switch to automatic ash mode, at this time, the LED display will
show a “ “ icon.
6. Select gear
- The device has 5 gears. When the device is opening, short press the
power button to
select the gear. When the corresponding level is selected, the
corresponding number
of sectors will be displayed, like “ ” is the fth gear.
7. Treatment
- Place the light-emitting part of the device at the starting treatment
position, press the
ash button after it is close to the skin, and start the treatment.
- When the mode is auto ash mode: The device ashing automatically
and move the
device slowly along the skin of the treatment area after each ash. The
above
operation can be done back and forth twice.
- When the mode is manual mode: The device will ash only when
press the ash
button. The above operation can be carried out three to four times.
8. Turn the device off
- Press the power button to turn off the device.
9. Disconnect the adapter
10. Take off the protective glasses
11. Clean the device
- Clean the light-emitting treatment window with a wet cloth or cotton
swab.
- Use alcohol with 75% to wipe down the device.
12. Store the device
- Put the device and accessories in the box for next use.
To Next Page
Loading...