12 | LEXI
Note:
1. Do not ash the same spot twice in a row.
2. There are sensors inside the device that only ash when the device is
in close contact with the skin.
3. When select the gear, it is recommended to start with the rst gear.
Finally, select the suitable gear.
4. The device will automatically shut down if there is no operation for 10
minutes.
5. The device has overheating protection, when the temperature of the
device is higher than 55 °C, the “ “ logo on the display will turn on
a red light to warn. The red light goes out when the temperature is
below 45 °C.
6. Mild reddening of skin after operation is a normal phenomenon.
7. It is recommended to avoid touching water within 6 hours after
depilation, and then moisturizing water can be used to moisturize the
irradiated parts after 15 minutes.
8. Hair Removal Cycle Standard
• 1. Weeks 1-3: 3 times a week
• 2. Weeks 4-6: 2 times a week
• 3. After the 6th week, once every two weeks or a month,
depending on the specic situation.
• 5 Maintenance
To ensure the best effect and longest service life, please clean the product
before and after each
depilation to avoid long-term accumulation of hair and dust. If you do not
clean normally, the
product will not get the effect it should have.
• Before starting cleaning, the machine must be turned off and
unplugged power to allow the machine to cool down.
• Wipe and clean the ash light glass with soft, clean and dry
cloth.
• Store the equipment in a dry and dust-free environment at -20
to 60°C.
To Next Page
Loading...