SPACEMAKER A24027 - Page 3

13
FIGURE 2.
Insert leg plug in front left leg.
Position remaining left front leg through console slot and insert leg cap.
Position console over right front leg through console slot. Casting support must locate BETWEEN
leg and console.
Position left leg on bottom pan and loosely assemble with 1 1/2" bolt, washer and nut.
1
2
3
FIG. 2
1 1/2" BOLT
1/4" NUT
1 1/2"
BOLT
WASHER
1/4" WASHER
STEP 2
STEP 3
CONSOLE
CASTING
SUPPORT
NUT
LEG
EXTENSION
PLUG
4
STEP 4
STEP 1
LEG
PLUG
(BAG PACK SP137-24)
LEG
CAP
SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 13