3
Spacesaver’s powered mobile storage systems provide a simple and efficient means to increase storage
capacity without expanding the space needed for your materials. The purpose of this manual is to provide the
information necessary to use and maintain your Spacesaver system. This document, combined with your on-
site training will provide you with the ability to use your system properly and efficiently.
As the owner of a Spacesaver high-density mobile storage system, you can be assured that you have
purchased the best in the industry. Its quality, safety, and ease of use are unsurpassed. Together with your
local representative, we stand behind our products with an installation and service team dedicated to
meeting your needs. From all of us, thank you for purchasing Spacesaver.
Introduction
Below is a list of items/tasks that will help to ensure that you get the most out of your mobile storage
system. Please familiarize yourself with these items and establish a routine based on these guidelines.
1. Familiarize yourself with the content of this manual.
2. Ask questions if you are unsure of any operational or safety features.
3. Bring any unusual performance of the system to the attention of your supervisor.
4. Follow the recommended shelf loading instructions found in this section of the owner’s manual.
5. Keep media neatly stored and pushed fully back onto the shelving to help maintain desired
aisle width.
6. Provide needed periodic maintenance according to the recommended schedule.
Ask about a periodic maintenance contract.
7. Make certain that all system safety devices are operational.
8. Call your local Spacesaver representative immediately if a safety device requires attention.
PROPER SYSTEM USE
Proper use of your system will ensure its longevity. In order to maintain proper performance, please
take the following precautions.
1. Do not climb on the shelving – use a stool.
2. Do not leave items in the aisles.
3. Do not operate the system without checking the open aisle(s) for people and/or objects.
4. Do not allow media to extend into the aisle to the extent that the carriages cannot close
together properly.
5. Do not overload your system. Stay within the recommended weight and distribution limits.
6. Do not operate any system under the safety override condition except in the presence of
your supervisor.
IMPROPER SYSTEM USE
1. Do not fully load one side of double entry shelving without counterbalance weight on the other side.
2. Begin loading at the lowest shelf.
3. At no time should the weight difference from one side of the carriage to the other exceed
30 percent.
RECOMMENDED LOADING INSTRUCTIONS
To Next Page
Loading...
Need help?
General