EasyManua.ls Logo

Spar HI Series - User Manual

Spar HI Series
17 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model #:__________________
Serial #:__________________
SPAR FOOD MACHINERY MFG, CO., LTD.
Instruction Manual for HI-Series Mixer
(SP-100A, SP-200A, SP-30HA, SP-40HA, SP-60HA, SP-A80HI, SP-B80HI)
Manufactured for Robot Coupe Australia & NZ Pty Ltd.
ROBOT COUPE AUSTRALIA & NZ Pty Ltd
Unit 3 / 43 Herbert Street, Artarmon NSW 2064, AUSTRALIA
Tel (02) 9478 0300
www.robotcoupe.com.au
info@robotcoupe.com.au
CONTENTS
Overall View of the Mixer ……………………………………….…………….… P. 2
Installation Instructions ……………………………………..………………… P. 3
Operating Instructions ……………………………………….….…………… P. 4
Cleaning Instructions …………………………………….……………….… P. 11
Maintenance ………………………………...……….………….… P. 12
Limited Warranty …………………………………………..…..…….… P. 12
Troubleshooting ……………………………………..………..…….… P. 13
Capacity Chart Table ………………………………………………....….… P. 14
Mixer Agitator/Application ………………………………………………....….… P. 1 5
Revised Date: MAY, 2019

Table of Contents

Questions and Answers

  • O
    Omar SalazarAug 6, 2025
    How to troubleshoot no power to my Spar HI?
    • M
      Michaela CoxAug 6, 2025
      If your Spar mixer isn't getting power, there are several potential causes: * The mixer might not be properly plugged into a working outlet or switched on. Ensure the plug socket is live. * The plug could be incorrectly wired, requiring a rewire. * A faulty fuse might be the culprit, necessitating a fuse replacement. * The cable may be damaged or split, in which case, replace the cable. * A damaged or faulty limit switch could be the issue, requiring a switch replacement. * The circuit breaker might be shut off or constantly shorting. Try resetting or replacing the circuit breaker, as some automatically reset.
  • P
    Patricia SalazarAug 14, 2025
    Why is my Spar mixer so noisy?
    • T
      Thomas JordanAug 14, 2025
      If your Spar mixer is making excessive noise, consider the following: * Ensure that the bowl and tool are correctly seated. * Uneven work surfaces can create excessive resonance. Check the work surface. * Worn bearings can cause noise. Consider replacing the bearings. * A damaged or faulty gearbox can also be the source. In this case, replace the gearbox. * Try reapplying high-pressure grease through the grease fitting.
  • C
    crystal71Aug 21, 2025
    What to do if my Spar HI fails to operate?
    • J
      john11Aug 21, 2025
      If your Spar mixer won't operate, here are a few things to check: * The machine will not operate with guards open. Make sure to check the bowl guard/lift. * The mixer might only operate on timer or manual position. Verify the timer position. * A damaged or broken belt can prevent operation. Replace the belt if necessary. * The machine will not operate if out of gear, so ensure it is properly in gear.
  • A
    amandareedAug 29, 2025
    Why does my Spar HI keep losing power?
    • R
      Roger KlineAug 29, 2025
      If your Spar mixer is losing power, it could be due to: * Overloading of the bowl. Reduce the load. * A damaged or worn gear. Replace the belt. * A damaged or faulty gearbox. Replace the shaft bias.

Summary

Overall View of the Mixer

Installation Instructions

Control Panel

Overview of the mixer's control interface and buttons.

Electrical Connection

Details on connecting the mixer to an electrical power supply.

Operating Instructions

Before Using the Mixer

Preliminary checks and user familiarization before operation.

Safety at Work

General safety precautions during operation.

Legal Compliance: Office, Shops and Railway Premises Act, 1963

Legal requirements regarding operator instruction and age.

Correct Use of the Mixer

Guidelines for proper operation and avoiding damage.

Tool Selection

Guidance on selecting the appropriate mixing tool for different tasks.

Fitting the Bowl

Procedure for correctly placing and securing the mixing bowl.

Fitting the Mixing Tool

Steps to attach and detach the mixing agitator.

Bowl Lift and Bowl Guard

Explanation of the bowl lift mechanism and guard interlocks.

Removing and Attaching the Bowl Guard

Instructions for removing and reinstalling the bowl guard.

Solid Safety Guard (Optional Accessory)

Information on the optional solid safety guard.

Controls

Overview and operation of the mixer's control buttons and timer.

Capacity

Recommended capacities for various food products and mixes.

Noise Test Report

Details on the mixer's sound pressure level.

Speed Selection

Guidelines for selecting appropriate mixing speeds for different tasks.

Bowl Scraper (Optional Accessory)

How to use the bowl scraper and its benefits.

Attachments

Information on available attachments and how to fit them.

Cleaning Instructions

Care of Your Mixer

General advice on cleaning and maintaining the mixer body.

Maintenance

Regular Basis Maintenance

Routine cleaning and lubrication tasks.

Annual Basis Maintenance

Periodic checks and lubrication for annual maintenance.

Gear Oil Meter and Renewal

Checking and refilling gear oil for specific models.

Gearbox Lubricant

Lubrication recommendations for gearboxes of various models.

Planetary Unit Lubricant

Lubrication procedure for the planetary unit.

Limited Warranty

Troubleshooting

Capacity Chart Table

Mixer Agitator;Application

SPAR Mixers Company Overview

History

Background information on the SPAR company.

Facilities

Information about the manufacturing facilities.

Quality Control

Details on the quality control processes used.

Features

Key characteristics and attributes of the mixers.

Spar HI Series Specifications

General IconGeneral
CategoryMixer
Bowl Capacity5 L
MaterialStainless Steel
Voltage220-240 V
Frequency50/60 Hz
SeriesHI Series

Related product manuals