Need help?Do you have a question about the Sparkrite SR100 and is the answer not in the manual?
Procedure to set the alarm system.
Notification for improperly closed doors before arming.
Procedure to deactivate the alarm system.
Indicates prior attempted break-in upon disarming.
Activates siren for personal safety.
Automatic arming and disabling current sensing.
Temporarily disables the alarm for servicing.
Guidance on testing vehicle wires before connection.
General advice for routing and securing wiring.
Methods for secure electrical connections.
Recommended location and mounting of the alarm unit.
Positioning and securing the wiring harness.
Diagram and explanation of wire connections.
Installation of the dashboard LED indicator.
Connecting indicator light wires.
Placement of the antenna wire.
Connecting the electric fan inhibit wire.
Connecting to door switches for passive arming.
Connecting the main earth wire.
Connecting to central locking interface.
Connecting the ignition input wire.
Wiring for starter motor immobilisation.
Connecting the main power and current sensing.
Installation of optional boot/bonnet switches.
Installation and adjustment of the shock sensor.
Troubleshooting transmitter not working.
Procedure for replacing the transmitter battery.
Issues with arming/disarming the alarm.
Troubleshooting current sensing function.
Problems with indicator light activation.
Troubleshooting vehicle start inhibition.
Diagnosing issues preventing the car from starting.
Identifying causes of false alarms.
Information on obtaining technical assistance.
Details of regulatory compliance and certifications.
To Next Page
General