Sparmax ARISM mini - User Manual

ARISM mini
User’s Manual
IMPORTANT SAFETY INFORMATION
Product Overview
• Before connecting the compressor to a power outlet, check if the voltage indicated on the compressor corresponds to the mains
voltage (100-120 V or 220-240 V). Using the compressor with the wrong mains voltage could damage the unit, and could cause an
electrical fire.
• When using electrical appliances, basic precautions should always be followed to reduce the risk of damage, fire, electric shock, personal injury
or property damage.
• Do not overload wall outlets, extension cords, or power strips beyond their capacity. This could cause a circuit breaker trip, insufficient voltage
supply, or an electrical fire.
• To avoid electric shock, never operate the compressor outdoors when raining, or in wet conditions.
• Always place the compressor on a flat and stable surface.
• Always remain in attendance when the compressor is in operation.
• Never place objects against, or on top of, the compressor. Operate the compressor in an open area without any obstructions that would restrict
the flow of fresh air into the compressor.
• Exceeding the pressure rating of pneumatic tools, such as airbrushes, spray guns, or air operated devices, could damage the tool and could also
cause serious personal injury. Never exceed the maximum allowable pressure rating recommended by your pneumatic tool’s manufacturer.
• Do not insert any foreign objects into the openings of the compressor.
• Do not disassemble the compressor or attempt to modify the compressor in any way.
This manual contains important information on product safety, set-up, operation, and maintenance. For optimum performance and safety,
read this manual carefully before using this product. Please keep this manual in a safe place for future reference.
Front view Rear view Included accessories
Parts List
1 Handle & Airbrush holder
2 Pressure adjustment knob
3 Outlet
4 On/Off Switch
5 Power cable
6 Plug*
7 Braided air hose
8
9
10
11
12
13
14
15
16
Specifications
Model: #1M
Air flow:
12 -14 l/min (0.42 - 0.49 cfm) at open flow *
Preset max pressure: 3.1 bar (45 psi )
Dimensions: L17.5 x W9 x H17.2cm (6.9” x 3.5” x 6.8”)
Weight: 2.5 kg (5.5lbs)
Household Use Only
Copyright © 2018 ANEST IWATA SPARMAX Co., Ltd. All rights reserved.
SP_MAN_ARISM MINI_A4_20180817
www.SPARMAXair.com
* illustration of plug is for reference only. Plug adaptor may vary depending on your region.
1
2
3
4
5
6
7
* Air flow range indicated shows average values over different voltages and frequencies. There will be tolerance for each unit and current fluctuation also affects
actual airflow performance.
1
0
4
3
2
5

Summary

Important Safety Information

Product Overview and Specifications

Product Overview

Details the visual components and parts list of the ARISM MINI compressor.

Specifications

Provides technical details such as model, air flow, pressure, dimensions, and weight.

Setup and Operation

Product Set Up

Instructions for unpacking, inspecting, and connecting the compressor for first-time use.

Product Operation

Guidance on connecting power, turning on, adjusting pressure, and safe usage practices.

Troubleshooting

Solutions for common issues like insufficient airflow or frequent compressor shutdowns.

Airbrush Operating Instructions

Air Pressure and Paint Preparation

Advises on adjusting air pressure based on paint fluidity and proper paint preparation.

Operating Your Airbrush

Explains the dual-action mechanism and provides tips for starting and varying spray effects.

Cleaning Your Airbrush

Details procedures for regular cleaning of the airbrush, needle, and needle cap.

Maintenance and Troubleshooting

Offers basic maintenance steps and advice on consulting dealers for issues.

Sparmax ARISM mini Specifications

General

Working Pressure	15-40 PSI
Noise Level	50 dB
Airflow	16 - 18 lpm
Auto Stop	Yes
Power Supply	AC 100-240V, 50/60Hz
Horsepower	1/6 HP