6
Safety Instructions
3. Battery:
NOTE: The battery is encapsulated within the Explorer control box and should not be tampered with. In the unlikely
event that the battery is exposed, please read the following instructions carefully.
a. Do not dismantle, open or shred secondary cells or batteries.
b. Do not short-circuit a cell or a battery. Do not store cells or batteries haphazardly in a box or drawer where
they may short-circuit each other or be short-circuited by other metal objects.
c. Do not subject cells or batteries to mechanical shock by dropping or hitting.
d. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has
been made, wash thoroughly with clean water and seek medical attention.
e. Do not use any charger except the one specifically supplied with the equipment.
f. Do not leave the equipment on prolonged charge when not in use.
g. Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
h. Seek medical attention immediately if the cell or battery has been swallowed.
i. All replacement batteries must be supplied and installed by Spartan Tool, LLC.
j. Keep cells and batteries clean and dry.
k. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several
times to obtain maximum performance.
l. Keep this document in a safe place for future reference.
4. Disposal: The operator is solely responsible for the disposal of any equipment at the end of its service
life. Dispose of any battery products in accordance to local regulations.
INTENDED USE
The TrapJumper system was designed to examine pipework and record/report its findings. We at Spartan Tool, LLC hold no
responsibility for further use that is not considered as intended. Do not use the TrapJumper for other purposes. The system cannot be
used in pipelines with potentially explosive atmospheres or medium. Only specifically manufactured equipment maked with the
identification icon, can be used for this purpose.
LABELING
The TrapJumper components are clearly labeled. The label includes model number, serial number, and all certifications. You may require
this information when talking to Spartan Tool, LLC Customer Service, as these can be used when ordering accessories or spare parts for
your product.
To Next Page
Loading...