9
Safety Instructions
WARNING
1. Users of the inspection system should work as safely and risk-free as operationally possible. The following
measures will help achieve this:
• Regularly inspect and perform any maintenance as required
• Ensure all personnel follow the safety guidelines laid out in this manual at all times.
• Keep up to date with any training courses.
• Always have the instruction manual available when using the inspection system.
2. Personal Safety: Any users of the inspection system, whether it's to operate, maintain or set up the equipment,
must be fully trained or instructed by an expert. Fully trained operators have sufficient knowledge of the
inspection system through their technical training and experience. They would also be familiar with the
appropriate health and safety regulations as well as accident prevention, giving them the knowledge to operate
the inspection system within safe working conditions.
• Read, understand, and follow all safety requirements specified in this instruction manual
• Carry out a risk assessment prior to any work
• Observe the relevant accident prevention regulations
• Attend and pass any site induction, if required
• Be instructed on the handling of any dangerous goods
• Be vigilant at all times of your work space and surrounding area
3. Avoid damage to property. As the operator of the TrapJumper system, it is your responsibility for the following:
• Do not use the TrapJumper outside the parameters of "intended use" (see page 6)
• Observe the operating conditions for this camera system as noted in this instruction manual
• Keep the equipment clean and in full working order. See cleaning instructions.
To Next Page
Loading...