Spartherm Premium - Table of Contents

3
Assembly and operating manual | Premium & Lean | 06.2023 | EN
Table of contents
1. Safety information 4
1.1 Intended use 4
1.2 Authorised target groups 4
1.2.1 Manufacturer 4
1.2.2 Owner 4
1.2.3 Qualified personnel 4
1.2.4 Users 4
1.3 Behaviour in emergencies 5
1.4 Chimney fire 5
1.5 General safety information 5
2. Product information 6
2.1 Functional principle 6
2.2 Operating modes 6
2.3 Material 6
2.4 Protective devices 6
2.5 Models 7
2.6 Product overview 8
2.7 Scope of delivery 10
2.8 Technical data 10
2.9 Nominal heat output 16
2.10 Dimensions 17
3. Types of fuel 18
3.1 Information on types of fuel 18
3.2 Permissible types of fuel 19
3.3 Permissible igniters 19
3.4 Fuel storage 19
3.5 Size of the fuel pieces 19
4. Assembly 20
4.1 Safety information for assembly 20
4.2 Requirements for assembly 20
4.3 Requirements for the installation site 21
4.3.1 Installation room 21
4.3.2 Safety distances 21
4.3.3 Installation dimensions 24
4.3.4 Convection air apertures 25
4.3.5 Flue gas routing 25
4.4 Preparation for assembly 26
4.5 Transporting the unit 26
4.6 Unpacking the unit 27
4.7 Adjusting the counterweight (optional) 27
4.8 Connecting the flue gas routing 29
4.9 Connecting the combustion air line (optional) 30
4.10 Installing the unit on site 31
4.11 Checking the installation 35
4.12 Performing initial start-up 35
4.13 Instructing the owner 35
5. Use 36
5.1 Safety information for use 36
5.2 Heating mode 38
5.2.1 Preparing the heating process 38
5.2.2 Heating up the unit 39
5.2.3 Controlling the heating process 40
5.2.4 Refuelling the unit 41
5.2.5 Ending the heating process 42
6. Cleaning 43
6.1 Safety information for cleaning 43
6.2 Cleaning intervals 43
6.3 Simple cleaning 43
6.4 Annual cleaning 45
7. Service work 46
7.1 Safety information for service work 46
7.2 Maintenance intervals 46
7.3 Maintenance measures 46
7.3.1 Stove system 46
7.3.2 Combustion air and flue gas pipe 46
7.3.3 Firebox door 47
7.3.4 Firebox lining 47
7.3.5 Self-closing firebox door 48
7.4 Malfunction repair 49
8. Disassembly 52
8.1 Safety information for disassembly 52
8.2 Dismantling the unit 52
9. Disposal 53
9.1 Disposing of the packaging 53
9.2 Disposing of the unit 53
10. Appendix 54
10.1 Accessories 54
10.2 Warranty terms 54
10.3 Standards and regulations 54
10.4 Declarations of conformity 54