SPE BEF200N - Electrical Requirements

BEF200N
PARTS BOOK OIPB-S18001
8
ELECTRICAL REQUIREMENTS
The BEF200N machine is supplied with a specially commissioned electric motor and starter
switch assembly. Each unit is fully tested, and the safety overload relays have been
calibrated and set according to the manufacturer’s specifications. In the event of the
malfunction on a new machine the owner should first check that the power supply on-site is
suitable and adequate.
BEF200N-1 – 110V 50Hz Single Phase
• Motor requires a 110v, 15 Amp supply – 4 mm 3 core wire.
BEF200N-2 – 230V 50Hz Single Phase
• Motor requires a 230v, 16 Amp supply - 7.5 mm 3 core wire.
BEF200N-2A – 230V 60HZ Single Phase (North America)
• Motor requires a 230v, 20 Amp supply – 12 awg 3 core wire.
BEF200N-3 – 400V 50Hz 3 Phase
• Motor requires a 400v, 16 Amp supply - 7.5 mm 4 core wire.
*See Electrical Specifications for more information.