SPE CBSW2-S - Error Message E01: Voltage Limit Exceeded; Error Message E02: Temperature Limit Exceeded; Error Message E03: Charging Time Exceeded; Error Message SCt: Internal Short Circuit

Operating Manual
shows “E03”
The message “E01” is displayed This means that the maximum voltage admissible by the
battery has been exceeded. The charging is interrupted
If the battery charger is provided with a safety
thermostat and the message “E02” is displayed
This means that the maximum temperature has been
exceeded. The charging is interrupted.
The message “E03” is displayed This means that the maximum time for the charging
phase has been exceeded. The charging is interrupted.
The message “SCt” is displayed This means that the total safety timer has interrupted the
charging
The message “Srt” is displayed This signals a possible internal short circuit
8 D00613-00