To Next PageTo Next PageHow to fix a Spear & Jackson Lawn Mower that won't start?
If your Spear & Jackson Lawn Mower isn't starting, the issue might be with the power supply. Check the fuse, switch, socket, and cable. If there are any issues, have them repaired by a qualified electrician. Alternatively, the on/off switch could be defective, requiring repair by a qualified technician, or the motor itself may be defective.
Why is my Spear & Jackson S1836EH Lawn Mower vibrating so much?
Excessive vibration in your Spear & Jackson Lawn Mower can be due to a damaged or incorrectly fitted blade. Replace the blade if it is damaged, or ensure that the blade is correctly fitted.
What to do if my Spear & Jackson S1836EH Lawn Mower is not collecting grass properly?
If your Spear & Jackson Lawn Mower isn't collecting grass well, there could be a few reasons. First, the cutting height might be too low, so try raising it. Second, check that the grass box is correctly fitted. Finally, remember that this mower collects at the rear when you walk forward in straight lines, not in side-to-side movements.
Why is my Spear & Jackson Lawn Mower not floating well?
If your Spear & Jackson Lawn Mower isn't floating well, it might be because the impeller is blocked by grass. Disconnect the mower from the mains and clean the deck and the impeller.
General| Model | S1836EH |
|---|---|
| Power Source | Electric |
| Power | 1800W |
| Type | Rotary |
| Cutting Width | 36 cm |
| Cutting Height Adjustment | Central |
| Cutting Heights | 20-70mm |
| Grass Box Capacity | 40L |
| Cable Length | 10m |
| Warranty | 2 Years |
Provides essential safety precautions for operating the hover mower.
Critical safety instructions related to the mower's electrical components and power supply.
Precautions for operator safety, including protective equipment and awareness.
Detailed instructions for the safe and proper operation of the hover mower.
Safety advice for performing maintenance, cleaning, and storing the mower.
Steps for fixing the lower and upper handles, ensuring correct movement and tightening.
Guide for blade maintenance, removal, fitting, and safety precautions during these tasks.
