Spear & Jackson S1740ER User Manual (English)

Questions and Answers:

J
Jeremy AdamsAug 3, 2025
Why Spear & Jackson S1740ER Lawn Mower motor does not run?
- S
  sarah26Aug 3, 2025
  If the Spear & Jackson Lawn Mower's motor isn't running, first, ensure it's properly connected to a power supply. If it is, the issue might be that the grass is too long and has wrapped around the blade; in this case, start mowing on shorter grass or an area that has already been mown. Another reason could be that the mower housing is clogged with grass and debris, so clean the discharge channel and housing to ensure the mowing blade can rotate freely. Lastly, check if you're cutting too much grass at once and correct the cutting height.
R
Rachel DunlapAug 12, 2025
Why does my Spear & Jackson Lawn Mower motor power drop?
- J
  Joseph RussellAug 12, 2025
  If your Spear & Jackson Lawn Mower's motor power drops, it could be due to several reasons. You might be cutting too much grass, so correct the cutting height. The mower housing might be clogged with grass and debris; clean the discharge channel and housing to allow the mowing blade to rotate freely. Also, a worn or rusty cutting blade can cause power loss, so replace the mower cutter blade. Finally, ensure the grass box is empty, as a full box can strain the motor.
A
Alyssa MontgomeryAug 25, 2025
What to do if Spear & Jackson Lawn Mower grass catcher is not filled sufficiently?
- H
  hrobinsonAug 25, 2025
  If the grass catcher on your Spear & Jackson Lawn Mower isn't filling sufficiently, several factors could be at play. You might be cutting too much grass at once, so adjust the cutting height. If the lawn is too wet, allow it to dry before mowing. A worn or rusty cutting blade can also affect performance, so consider replacing it. Make sure the air vents on the grass box aren't blocked; if they are, clean them. Lastly, check if the mower housing is clogged with grass and debris and clean the discharge channel and housing.