To Next PageTo Next PageHow to improve cutting performance of Spear & Jackson Pole Saw?
If your Spear & Jackson Pole Saw has poor cutting performance, the saw chain might be blunt and needs replacing. Also, check the chain tension and ensure the saw chain is fitted correctly.
Why Spear & Jackson S7520EPS motor does not run?
If the Spear & Jackson Pole Saw motor doesn't run, it could be due to a lack of electricity. Check the socket, cables, and plugs. If the cable or switch is damaged, have it repaired by a service agent. Also, worn carbon brushes may be the reason; in this case, the carbon brushes need replacing.
What to do if Spear & Jackson Pole Saw chain becomes hot?
If the chain of your Spear & Jackson Pole Saw becomes hot, the issue might be related to the chain lubricant. Check the oil level and chain lubrication.
What to do if Spear & Jackson Pole Saw chain jumps off guide bar?
If the chain jumps off the guide bar on your Spear & Jackson Pole Saw, check the chain tension.
Explains symbols used in the manual for safety.
Provides essential safety advice for operating power tools.
Guidelines for maintaining a safe and clear work environment.
Crucial precautions regarding electrical hazards and power connections.
Advice on user alertness, common sense, and avoiding distractions.
Instructions on proper usage, maintenance, and handling of the tool.
Identifies potential hazards that remain even with correct usage.
Defines the product's purpose and restrictions on its application.
Lists all components included in the product packaging.
Steps for safely unpacking and checking all product components.
Instructions on how to connect the working head to the telescopic pole.
Guidance on filling and maintaining the chain oil reservoir.
Steps to remove protective covering from the guide bar.
Instructions for attaching the shoulder strap for user comfort.
How to change the length of the telescopic pole for different tasks.
How to rotate the cutting head to different angles for optimal cutting.
Advice on managing the power cord to prevent tripping hazards.
Instructions for safely connecting the tool to an electrical outlet.
Steps for powering the pole saw on and off safely.
How to verify the chain oil level for proper lubrication.
Guidance on proper grip and body positioning for safe operation.
Techniques for making effective and safe cuts on branches.
Procedure for safely disconnecting the tool from power after use.
How to keep the motor vents clean for optimal performance.
Steps to adjust chain tension for safe and efficient cutting.
Importance of periodically checking that all fasteners are secure.
Instructions for replacing the saw chain and guide bar.
How to maintain the guide bar for longevity and performance.
Guidelines for storing the pole saw safely and appropriately.
Advice on safely transporting the pole saw.
Lists part numbers and corresponding accessories for the pole saw.
Solutions for when the pole saw's motor fails to start or operate.
Troubleshooting steps for reduced efficiency in cutting branches.
Addresses issues where the saw chain detaches from the guide bar.
Solutions for when the chain movement is stiff or obstructed.
Explains why the chain might overheat and how to fix it.
Explains symbols used in the manual for safety.
Provides essential safety advice for operating power tools.
Guidelines for maintaining a safe and clear work environment.
Crucial precautions regarding electrical hazards and power connections.
Advice on user alertness, common sense, and avoiding distractions.
Instructions on proper usage, maintenance, and handling of the tool.
Identifies potential hazards that remain even with correct usage.
Defines the product's purpose and restrictions on its application.
Lists all components included in the product packaging.
Steps for safely unpacking and checking all product components.
Instructions on how to connect the working head to the telescopic pole.
Guidance on filling and maintaining the chain oil reservoir.
Steps to remove protective covering from the guide bar.
Instructions for attaching the shoulder strap for user comfort.
How to change the length of the telescopic pole for different tasks.
How to rotate the cutting head to different angles for optimal cutting.
Advice on managing the power cord to prevent tripping hazards.
Instructions for safely connecting the tool to an electrical outlet.
Steps for powering the pole saw on and off safely.
How to verify the chain oil level for proper lubrication.
Guidance on proper grip and body positioning for safe operation.
Techniques for making effective and safe cuts on branches.
Procedure for safely disconnecting the tool from power after use.
How to keep the motor vents clean for optimal performance.
Steps to adjust chain tension for safe and efficient cutting.
Importance of periodically checking that all fasteners are secure.
Instructions for replacing the saw chain and guide bar.
How to maintain the guide bar for longevity and performance.
Guidelines for storing the pole saw safely and appropriately.
Advice on safely transporting the pole saw.
Lists part numbers and corresponding accessories for the pole saw.
Solutions for when the pole saw's motor fails to start or operate.
Troubleshooting steps for reduced efficiency in cutting branches.
Addresses issues where the saw chain detaches from the guide bar.
Solutions for when the chain movement is stiff or obstructed.
Explains why the chain might overheat and how to fix it.
General| Brand | Spear & Jackson |
|---|---|
| Model | S7520EPS |
| Category | Pole Saw |
| Language | English |
