To Next PageTo Next PageWhy is my Spear & Jackson S75EC2 motor not running?
The motor of your Spear & Jackson Pole Saw may not be running due to a lack of electricity or worn carbon brushes. Check the socket, cables, and plugs for power. If the cable or switch is damaged, have it repaired by a service agent. Also, worn carbon brushes need replacing.
What to do if Spear & Jackson S75EC2 Pole Saw has poor cutting performance?
If your Spear & Jackson Pole Saw has poor cutting performance, the saw chain may be blunt, the chain tension may be incorrect, or the saw chain may be fitted incorrectly. You should sharpen or replace the saw chain, check the chain tension, and check that the saw chain is properly fitted.
What to do if the chain of my Spear & Jackson S75EC2 Pole Saw becomes hot?
If the chain of your Spear & Jackson Pole Saw becomes hot, this may be due to the chain lubricant. Check the oil level and chain lubrication.
What to do if the chain jumps off the guide bar of my Spear & Jackson S75EC2 Pole Saw?
General| Brand | Spear & Jackson |
|---|---|
| Model | S75EC2 |
| Category | Pole Saw |
| Language | English |
