Spear & Jackson YT4348

Questions and Answers

T
Tricia GrahamAug 7, 2025
Why is my Spear & Jackson YT4348 Pole Saw motor not running?
- P
  ploweAug 7, 2025
  The motor of your Spear & Jackson Pole Saw may not be running due to a lack of electricity or worn carbon brushes. Check the socket, cables, and plugs for power. If the cable or switch is damaged, have it repaired by a service agent. Also, worn carbon brushes need replacing.
K
Kevin CooperAug 12, 2025
What to do if Spear & Jackson Pole Saw has poor cutting performance?
- J
  Joshua NguyenAug 12, 2025
  If your Spear & Jackson Pole Saw has poor cutting performance, the saw chain may be blunt, the chain tension may be incorrect, or the saw chain may be fitted incorrectly. You should sharpen or replace the saw chain, check the chain tension, and check that the saw chain is properly fitted.
D
Debra HesterAug 17, 2025
What to do if the chain of my Spear & Jackson YT4348 becomes hot?
- D
  David HigginsAug 17, 2025
  If the chain of your Spear & Jackson Pole Saw becomes hot, this may be due to the chain lubricant. Check the oil level and chain lubrication.
B
Bonnie SampsonAug 22, 2025
What to do if the chain jumps off the guide bar of my Spear & Jackson YT4348 Pole Saw?
- P
  Patricia TravisAug 22, 2025
  If the chain jumps off the guide bar of your Spear & Jackson Pole Saw, it could be due to incorrect chain tension. Check the chain tension.
J
johnsonbrandonAug 27, 2025
Why Spear & Jackson YT4348 chain does not move?
- E
  Evelyn RogersAug 27, 2025
  If the chain on your Spear & Jackson Pole Saw does not move, the chain brake may be engaged. Check the chain brake and release it if necessary.
A
andrew40Sep 1, 2025
How to fix a Spear & Jackson YT4348 chain that works with difficulty?
- D
  david78Sep 1, 2025
  If the chain on your Spear & Jackson Pole Saw works with difficulty, it may be due to incorrect chain tension. Check the chain tension.