Spearhead Multi-Cut 420
1
Spearhead
Multi-Cut 420
Handbook
1
st
Edition – April 2007
Important Note
The information contained in this manual is correct at the time of publication.
However, in the course of constant development, changes in specification are
inevitable. Should you find the information given in this book different to the
machine it relates to please contact the “After Sales Department” for advice.
© Spearhead Machinery Limited 2007
Please ensure that this manual is handed to the operator before using the
machine for the first time. The operator must fully understand the contents
of this manual before using this machine.
If the machine is resold the Manual must be
iven to the new owner.
Spearhead Machinery
Green View
Salford Priors
Evesham
Worcestershire
WR11 8SW
Tel: 01789 491860
Fax: 01789 778683
www.spearheadmachinery.com
enquiries@spearheadmachinery.com
To Next Page
General