Spearhead Multi-Cut 420 - Daily

Spearhead Multi-Cut 420
14
Servicing & Maintenance
Daily
 Grease all points.
 Check bolts are tight on all gearboxes.
 Check condition of blades and blade bushes; ensure all retaining bolts are
fully tight.
 Check wheel nuts are tight.
 Check tyre pressures – 40 P.S.I.
 Check gearbox lubrication, replenish as necessary to the correct level line on
the dipstick, provided with each gearbox.
Fig. 8 Lubrication points
A Wing rams
B Wheel stem grease points
C Wheel bearings
D Wing hinges
E Input PTO shaft
F Wing PTO shafts
G Centre PTO coupling
H Headstock
Fig 8
RH blade rotation
Anti clockwise
LH blade rotation
Clockwise