Users manuel Caddy e-Move Version 01.05
3 OPERATING INSTRUCTIONS
3.1 Checking before driving.
Ensure that the charger cord is disconnected.
Switch must be turned on (Figure 4 S).
Emergency button should be in the extended position (Figure 3 K).
3.2 Driving
The key switch must be in position 1 (Figure 3 H) The beacon light is working.
The On / Off button must be activated. (Figure 2B) The battery indicator lights up
(Figure 2A)
Select one of five speeds (Figure 2 D) Choose a speed at which the movement of
the Caddy E-move allows controlling. The settings are depending on the type of
transport being carried out.
Step on the footboard. (Figure 1 9)
Move the control stick (Figure 2E) in the direction you want to move the
Caddy e-Move.
The Caddy e-Move is equipped with a thermal security. If the engines are
overloaded than the thermal protection will enable the engines.
When reversing maneuver is activated automatically the software will activate the
"creep speed".
Stay with reversing maneuver always on the footboard to prevent
entrapment
3.3 Transfer
For the transfer of the person being transported, the key switch must be put to 0
(Figure 3 H), the flashing light is not working. The
Caddy e_Move can not now during the transfer inadvertently be put in motion.
Enter the transfer of the person to be transported in accordance with the safety
instructions and use Caddy³.
Attach the belt.
Place the hand luggage in the luggage rack (Figure 1 8)
Follow 3.2 Riding.
To Next Page
Loading...