Users manuel Caddy e-Move Version 01.05
3:10 Charging batteries
The Caddy e-Move features an integrated charger
To load the batteries, the Caddy e-Move must be connected with a standard plug
on 220/230 volts of electricity.
The main switch (Figure 4 S) should be on.
The caddy e-Move is protected against driving off without the power cord is
disconnected.
on the driving compartment (Figure 1, 11) is an LED indicator light disposed. If
the LED is green then the batteries are fully charged.
See, for a description of the charging process, the Annex AGM Battery Charger.
Please note that it does not complete a full course of the charging cycle has the
effect that the battery pack suffers damage. The life of the battery pack is thus
greatly reduced.
3:11 Education / Qualification
The Caddy e-Move may only be operated by trained and certified employees.
Special Mobility organizes a training and certification of staff training other
employees.
4 Maintenance
4.1 Cleaning the Caddy e-Move
Decrease dry dirt
Clean the upholstery, metal parts and frame parts with a soft dry cloth.
Mud and other wet dirt decrease
First clean the dirty parts with a wet sponge. Then rub the parts with a dry soft
cloth.
4.2 Maintenance Interval
The maintenance interval depends on the deployed hours.
There will be individually agreed what is the right frequency.
To Next Page
Loading...