Need help?Do you have a question about the Specialized AFR Rear Shock EPA and is the answer not in the manual?
Information on warranty, service issues, modifications, and authorized service centers.
Defines shock sag as compression under rider weight for setup.
Controls the shock's compression rate for absorbing impacts.
Component that dumps oil on large impacts to improve absorption.
Controls the shock's return rate after compression.
Adjusts shock platform firmness via a separate bleed circuit.
Instructions for cleaning the external body of the shock.
Specific maintenance procedures for the shock's air sleeve.
Pivot maintenance including cleaning and greasing.
Recommends professional service for inspection and oil changes.
Using the included sag meter for initial sag setting.
Measuring sag in millimeters based on shock stroke.
Setting sag for Epic/Era shocks using air charts and measurements.
Adjusting the rebound damping with the red knob.
Adjusting Brain Fade for ride platform efficiency.
Setting sag for Enduro SL shocks using air charts.
Adjusting rebound damping on Enduro SL shocks.
Adjusting low-speed compression with the lever.
Setting sag for Stumpjumper/Safire shocks using air charts.
Adjusting rebound damping on Stumpjumper/Safire shocks.
Adjusting Trail Tune inertia valve damping.
General| Brand | Specialized |
|---|---|
| Model | AFR Rear Shock EPA |
| Category | Bicycle Accessories |
| Language | English |
To Next Page