Need help?Do you have a question about the Specialized AFR E100 and is the answer not in the manual?
Guidance on authorized service, modifications, and warranty implications for the fork.
Fork compression under rider weight; requires setup chart for air pressure/sag percentage.
Controls resistance for firm ride feel, enhancing cornering and braking.
Adjusts firmness at ride height via a separate bleed circuit.
Controls the rate of fork return after compression.
Routine fork care including sag checks, cleaning, and service intervals.
Wipe forks after rides, wash with soap/water, check brakes/headset.
Inspect fork and stem for burrs/sharp edges, round out edges to prevent damage.
Steps for installing bearings, headset, spacers, and stem onto the fork.
Procedure for marking, cutting, and finishing the steerer tube for proper fit.
Steps for installing expander plug, fork into frame, headset, and brakes.
Table detailing recommended air pressure and sag for rider weight and fork model.
Guide to setting air pressure and sag for optimal fork performance.
Instructions for adjusting the rebound knob for desired fork return speed.
How to adjust the blue knob for firmer or softer compression settings.
General| Travel | 100 mm |
|---|---|
| Material | Aluminum |
| Color | Black |
| Compatibility | Specialized e-bikes |
| Adjustment | Rebound |
To Next Page