Specialized CRUX - 7 Seatpost Assembly; Alpinist Seatpost

13
Route the rear brake hose:
 Route the rear brake hose through the chainstay ICR port, over the
bottom bracket shell, and up the down tube.
 Install a churro (foam sleeve) over the brake housing and into the down
tube.
 Route the brake hose out of the head tube ICR port.
 Install a grommet over the brake housing and into the head tube ICR
port.
 Install the caliper on the chainstay.
 Complete the rear brake installation according to the brake
manufacturer’s instructions.
Route the front brake hose:
 Run the front brake hose in through the lower ICR port in the fork and
guide it up the fork leg until it exits at the ICR port on the fork crown.
 Install a grommet over the brake housing and into the upper fork ICR
port.
 Complete the front brake installation according to the brake
manufacturer’s instructions.
7.SEATPOST ASSEMBLY
Most models come with the Terra seatpost (5.5.2).
7.1. ALPINIST SEATPOST
A
B
G
H
I
E
D
C
F
J
# DESCRIPTION
A
M6 Bolt
B
M6 Cradle Washer
C
M6 Barrel Nut
D
M5 Bolt
E
M5 Cradle Washer
F
M5 Nut