7
19
Expander Plug S202500011 6 mm 45 5.1
20
*Rear Derailleur Plug (Wired Di2) S159900006
21
*Rear Derailleur Plug (Wireless SRAM) S179900015
22
*Rear Derailleur Plug (Mechanical) S226500002
23
Down Tube ICR Cover Plate (Wireless) S186500003 2.5 mm 7 0.8
24
Down Tube ICR Mechanical Port S216500009 2.5 mm 7 0.8
*Not all models are equipped with all the above components.
All models are compatible with electronic shifting (wired or wireless) and are compatible with 1x mechanical configurations.
4.2. TORQUE SPECIFICATIONS
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your bicycle is important for your safety. If too little force is applied,
the fastener may not hold securely. If too much force is applied, the fastener can strip threads, stretch, deform, or break. Either way, incorrect
tightening force can result in component failure, which can cause you to lose control and fall. Where indicated, ensure that each bolt is torqued
to specification. After your first ride, and consistently thereafter, recheck the tightness of each bolt to ensure secure attachment of the
components.
CAUTION: Ensure that all contact surfaces are clean and bolt threads are greased or have a thread-locker compound (refer to the instructions
for each bolt) prior to installation.
Many bolts have a blue thread-lock patch on the threads to help secure the bolt under torque. Repeated installation and removal of a bolt may
reduce the effectiveness of the patch. However, it can be replaced with the application of a liquid blue thread locker.
The following tools are required for installation of this product:
2, 2.5, 3, 4, 5, 6 mm socket-style Allen key bits Torque wrench High-quality grease
Cable housing cutters Carbon assembly compound (fiber paste) Thread-locker
To Next Page
Loading...
