Specialized TERO EQ KIT - Tero EQ Kit Assembly; Prepare the Tero

3
ASSEMBLY
PREPARE THE TERO.
 Before starting, remove the battery and place the Tero in a
stable bicycle stand then remove the wheels.
Fig. 1
 Power off the Tero on the MasterMind TCD-w (A).
 Use the supplied key to unlock the battery latch (B).
 Rotate the latch lever clockwise (C) to release the
battery (D).
Fig. 2
 Supporting the battery with one hand, rotate the latch
lever clockwise to release the battery fully (E).
 Rotate the battery down and align the battery roughly
20 degrees with the downtube (F).
E
F
B
D
C
A
Fig. 3
 Lift the battery upwards and rearward to unhook it,
then remove it from the frame.
WARNING: Be careful not to drop the
battery when removed from the bicycle.
A hard enough impact can potentially
damage the battery which may or may not
be visible from the outside but can render
the battery unsafe.
INFO: For more information on battery
removal and installation, please refer to
the Tero user manual supplied with your
bicycle.
1
3
2