Need help?Do you have a question about the Speck pumpen V 30 and is the answer not in the manual?
General| Brand | Speck pumpen |
|---|---|
| Model | V 30 |
| Category | Water Pump |
| Language | English |
Instructions for disassembling the inter casing from the pump casing, with specific steps for different model types.
Steps to remove the impeller, including instructions for securing and detaching it from the shaft.
Procedure for removing the shaft seal housing from the motor flange.
Guide on how to press out and remove the mechanical seal components.
Instructions for installing the rotating and standstill parts of the mechanical seal with lubrication.
Steps to mount the shaft seal housing, including installing distance springs and tightening nuts.
Procedure for installing the impeller and adjusting the gap using a feeler gauge.
Instructions for fitting the inter casing onto the shaft seal housing, noting alignment pins.
Steps to attach the pump case to the shaft seal housing using screws.
Procedure for installing the inter casing onto the pump casing, securing with specific screws.
Instructions for mounting the pump case onto the shaft seal housing and tightening screws.
To Next Page