Need help?Do you have a question about the Spectra Precision HL760 and is the answer not in the manual?
Explains the necessity of pairing two HL760 receivers and the initial setup requirements before pairing.
Details the step-by-step process for setting the radio mode and initiating the pairing sequence on HL760 receivers.
Guides on setting up one HL760 unit as a remote display/control panel, defining roles and confirming the connection.
Explains the necessity of pairing two HL760 receivers and the initial setup requirements before pairing.
Details the step-by-step process for setting the radio mode and initiating the pairing sequence on HL760 receivers.
Guides on setting up one HL760 unit as a remote display/control panel, defining roles and confirming the connection.
General| Accuracy (RTK) | Not applicable |
|---|---|
| Accuracy (Static) | Not applicable |
| Laser Wavelength | Not applicable |
| Channels | Not applicable |
| Frequency | Not applicable |
| Data Output Rate | Not applicable |
| Accuracy (Fine) | ± 0.5 mm |
| Accuracy (Medium) | ± 1.0 mm |
| Accuracy (Coarse) | ± 2.0 mm |
| Accuracy (Very Coarse) | ± 3.0 mm |
| Display | Front and Rear LCD |
| Power Supply | 2 x AA batteries |
| Battery Life | 60+ hours |
| Weight | 280 g (0.62 lb) |
| Operating Temperature | -20 °C to +50 °C (-4 °F to +122 °F) |
| IP Rating | IP67 |
| Communication | Radio communication with the laser level |
To Next Page
