Spectra H11H4-II1 - Power Management Settings

34
Using BIOS
• CPU Temperature
• System Temperature
• CPU Fan Speed
• System Fan Speed
• +3.3V
• +5VSB
• +12V
• +5V
• VCORE
System Component Characteristics
These items display the monitoring of the overall inboard hardware health
events, such as System & CPU temperature, CPU & DIMM voltage, CPU &
system fan speed,... etc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.


 Power Management Setup
This page sets up some parameters for system power management operation.
Power Management Setup
Resume By Ring [Disabled]
Resume By PME [Disabled]
Resume By Lan 1 [Disabled]
Resume By Lan 2 [Disabled]
Resume By USB [Disabled]
Resume By PS2 KB [Disabled]
Resume By PS2 MS [Disabled]
Resume By RTC Alarm [Disabled]
EUP Function [Disabled]
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
About Resume by
RING/PCI-E/PCI/LAN PME
F1: General Help
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Advanced
Resume By PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI/PCIE LAN card. You must use an ATX power supply in order to use this feature.
Use this item to do wake-up action if inserting the PCI/PCIE card.
Resume By Lan1~2 (Disabled)
Use this item to enable or disable integrated LAN to wake the system. (This item
cannot be disabled if ME is on at Sx state. If disabled,resume by USB will not be
available.)
Resume by RING (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the Modem. You
must use an ATX power supply in order to use this feature.