Spectra H11H4-II1 - BIOS Boot Sequence

56
Using BIOS
This page enables you to set the keyboard NumLock state and devices boot sequence.
Boot Menu
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Windows 7 or other OS: Boot
policy for legacy OS
Windows 8.x: Boot policy for
UEFI OS without Compatibility
Support Module (CSM)
Manual: User customized CSM
parameters & boot policy
Main Advanced Chipset Security Boot Exit

F1:General Help
+/- : Change Opt.
Enter : Select

:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Boot Configuration
Operation System Select [Windows 8.x or 10]
Launch PXE OpROM [Disabled]
Launch Storage OpROM [Enabled]
Fast Boot [Disabled]
Bootup NumLock State [On]
Quiet Boot [Enabled]
Update System BIOS [Disabled]
Boot Mode Select [UEFI]
FIXED Boot ORDER Priority
Boot Option #1 [Hard Disk]
Boot Option #2 [CD/DVD]
Boot Option #3 [USB Hard Disk]
Boot Option #4 [USB CD/DVD]
Boot Option #5 [USB Flash]
Boot Option #6 [USB Floppy]
Boot Option #7 [Network]
Bootup NumLock State (On)
This item determines if the NumLock key is active or inactive at system start-up
time.
Launch PXE OpROM (Disabled)
This item enables or disables launch PXE Option ROM.
Fast Boot (Disabled)
This item enables or disables boot with initialization of a minimal set of device
required to launch active boot option.
Update System BIOS (Disabled)
This item enables or disables to update system BIOS.
Operation System Select (Windows 8.x or 10)
This item is used to show the information of the operation system.
Boot mode select (UEFI)
Use this item to select boot mode.
Boot Option #1~7
These items show the boot priorities.
Launch Storage OpROM (Enabled)
Use this item to enable or disable the Storage OpROM.
Quiet Boot (Enabled)
This item enables or disables boot with initialization of a minimal set of device
required to launch active boot option.