1
Introducing the Motherboard
Chapter 1
Introducing the Motherboard
Introduction
Thank you for choosing the H11H4-II1 motherboard. This motherboard is a high
performance, enhanced function motherboard designed to support Intel Skylake
processors for high-end business or personal desktop markets.
This motherboard is based on integrated Intel Chipset for best desktop platform
solution.
Skylake is a dual-core or quad-core processor. The chipset for Skylake is
highly integrated and high performance. Moreover, Skylake will feature DirectX12-
compliant Gen 9 architecture graphics and support Win8 and UEFI Secure Boot.
This motherboard supports up to 32 GB
260pin SO-DIMM memory with dual-
channel DDR4 2133 (2GB/ 4GB/ 8GB/ 16GB) SDRAM. One PCI Express x16 slot is
supported, is fully compliant to the PCI Express Base Specification revision 3.0. One
M.2 slot and One Mini PCIE are also supported.
It implements an EHCI (Enhanced Host Controller Interface) compliant interface
that provides six USB 2.0 ports (two USB 2.0 ports at rear panel, one USB 2.0 type
A port onboard, one USB 2.0 header supports additional two USB 2.0 ports and one
port is supported by mPCIE 2.0 USB signal) and four USB 3.0 ports at the rear panel.
The motherboard is equipped with advanced full set of I/O ports in the rear panel,
including one PS/2 mouse and PS/2 keyboard Combo connector, two Serial ports
(COM), one VGA port, two Lan ports, two USB 2.0 ports, four USB 3.0 ports, one
HDMI port and audio jacks for line-out and Mic-in.
In addition, this motherboard supports two SATA 6.0Gb/s connectors.
To Next Page
Loading...