54
Using BIOS
ME Configuration
Scroll to this item and press <Enter> to view the following screen:
ME Control (Enabled)
Use this item to enable or disable the ME Firmware.
ME FW Version (11.0.0.1205)
This item shows the ME FW version.
Press <Esc> to return to the Chipset Menu page.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Chipset
Management Engine Technology Configuration
ME Control [Enabled]
TPM Device Selection [PTT]
ME FW Version 11.0.0.1205
Enable/Disable ME Firmware
F1:General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
TPM Device Selection (PTT)
Use this item to select TPM device: PTT or dTPM. PTT-Enables PTT in SkuMgr. dTPM
1.2-Disables PTT in SkuMgr Warning! PTT/dTPM will be disabled and all data saved
on it will be lost.
To Next Page
Loading...