CONTROLLING THE MUSIC PLAYBACK ON YOUR BLUETOOTH DEVICE USING
THE REMOTE CONTROL
1. Tap the /STANDBY button on remote control or press and hold the /MODE on
main unit to turn on the unit.
2. Turn on Bluetooth of your cell phone or device which was previously paired with the
JSBW-210, tap the Bluetooth button on remote control or tap /MODE button
on main unit repeatedly to select the Bluetooth mode, the Mode Indicator LED turns
blue and begins flashing.
3. After the Bluetooth device is paired with the JSBW-210, wait for around 5 seconds
and then press the PLAY/PAUSE button on remote control to start music
playback from your cell phone or Bluetooth device.
4. Press the PLAY/PAUSE button to pause or resume playback.
5. Press the VOLUME+/- button to adjust your desired volume level
6. If necessary, press the MUSIC, MOVIE or VOICE button on remote control to select
different sound effects or press the TREBLE or BASS +/- buttons on t
he remote
control to adjust the separate treble and bass levels.
7. Press the or button on the remote to select the desire music track.
8. Tap the /STANDBY button on remote control or press and hold the /MODE
button on main unit to turn off the unit after listening.
Re-linking to a cell phone or Bluetooth device
If your cell phone or Bluetooth device is already paired with the JSBW-210, but became
unlinked at some point, even with both Bluetooth devices turned on. You can re-link
them by:
1. Press and hold the
/PAIR button to re-link your cell phone. The Mode Indicator
LED will turn blue and flash while linking.
2. Select the JSBW-210 from the devices list on your cell phone for linking. The Mode
Indicator LED stops flashing and remains lit blue if the JSBW-210 and your cell
phone have been re-linked successfully.
3. You can also re-link the JSBW-210 by using Bluetooth operation of your cell phone.
Please refer to operation manual of your cell phone for more information.
PRESET SOUND ENHANCEMENTS (REMOTE CONTROL ONLY)
The JSBW-210 features 3 different sound enhancements to customize your listening
experience. You can select the desired effect by pressing the MUSIC, MOVIE or
VOICE button on remote control, red LED will flash once to confirm. The red LED will
not flash if the unit already in relative sound enhancement mode.
In addition, you can adjust treble and bass effects by using the TREBLE & BASS +/-
buttons.
NOTES FOR SOUND MODE BUTTONS:
1.) Press
Buttons.
the MUSIC button first in order to use the separate TREBLE & BASS +/-
E12
To Next Page
Loading...