BLUETOOTH OPERATION
PAIRING (LINKING) A BLUETOOTH ENABLED CELL PHONE OR OTHER
BLUETOOTH ENABLED DEVICE to the JSBW-210
1. With the power on, tap the Bluetooth button on remote control or tap the
/MODE button on main unit repeatedly to select Bluetooth mode. The Mode
Indicator LED turns blue and will be flashing. The JSBW-210 is now ready to pair
(link) with your Bluetooth device.
2. Turn on the Bluetooth feature of your cell phone and enable the search or scan
feature to find the JSBW-210.
3. Select "JSBW-210" from the device list when it appears on your device screen. If
required, enter the pass code “0000” to pair (link) the JSBW-210 with your cell
phone.
4. After successfully pairing (linking) your cell phone with the JSBW-210, the Mode
Indicator LED stops flashing and remains lit blue. You can now play music from
your cell phone or Bluetooth device wirelessly to the JSBW-210.
Note: If you want to connect the JSBW-210 to another cell phone after pairing
successfully, then you need to turn off the Bluetooth on the paired cell phone
first if it
is in range before going through the above steps. Otherwise, the
JSBW-210 will automatically reconnect to the previously linked cell phone or
device.
5. Press the VOLUME +/- button to adjust the desired volume level.
NOTE: The Red LED will light and flash to acknowledge the VOLUME+/-,
TREBLE+/- or BASS +/- button is pressed. When the setting reaches its
maximum or minimum level, the red LED will not light for indication.
6. To turn off the JSBW-210 Bluetooth, tap the /STANDBY button on remote
control or press and hold the /MODE button on main unit to turn the unit to
standby mode. Mode Indicator LED turns red. Don’t forget to also turn off the
Bluetooth feature on your cell phone or Bluetooth device.
Notes:
1.) Refer to manual of your cell phone or other Bluetooth enabled device for
Bluetooth operation, since it may vary from model to model.
2.) If your Bluetooth enabled device does not support A2DP, it will not play the music
through the speaker, even after it's paired (linked).
3.) If you are pairing (linking) your computer
to the JSBW-210 using Bluetooth, you
may need to set the JSBW-210 as your computer’s default sound device.
E11
To Next Page
Loading...