Spectracom SAS17E - User Manual

EPSILON
SWITCH & AMPLIFIER
SYSTEM
E (SAS17E & SAS36E)
USER’S MANUAL
95 Methodist Hill Drive
Rochester, NY 14623
Phone: US +1.585.321.5800
Fax: US +1.585.321.5219
3 Avenue du Canada
91974 Les Ulis, France
Phone: +33(0)1.64.53.39.80
Fax: +33(0)1.64.53.39.81
www.spectracomcorp.com
www.spectracom.fr
Ref. Number 170024-D1
Manual Revision D1
08 September 2008

Summary

2 Features

2.1 Main Power Supply

2.2 DC Power Supply

2.3 Input Signals

Specifications for all available input signal types and their respective connectors.

2.4 Output Signals

Specifications for all available output signal types and their respective connectors.

2.5 Urgent Alarm

2.6 Non-Urgent Alarm

2.7 Ethernet Port

3 Installation

3.1 Powering Up

Steps for connecting power sources and initiating the system's power-on sequence.

3.2 Network Connection

Instructions for connecting the unit to a network and configuring its IP address.

3.3 Configuring and Operating the SAS-E

Guide to setting up and managing the SAS-E via its web interface.

3.4 Status of the SAS-E

Explanation of how to monitor system status using web pages and front panel LEDs.

3.5 Alarm

4 Web Interface

4.1.3 SAS-E Status

4.1.4 Admin Password Page

4.1.5 Network Setup Page

Guide to configuring network connection parameters like IP address and DHCP.

4.1.6 SNMP and Traps Setup Page

Instructions for configuring SNMP and setting up trap notifications.

4.1.7 SAS-E Configuration

Details on configuring system parameters, time, and other settings.

5 SNMP Control

5.1 MIB Content

5.2 SNMP Traps

Spectracom SAS17E Specifications

General

Manufacturer	Spectracom
Model	SAS17E
Data Rate	10/100 Mbps
Input Voltage	100-240 VAC
Mounting	Rack mount
Operating Temperature	0°C to 50°C