To Next PageTo Next Page
Need help?Do you have a question about the Spectracom SAS36E and is the answer not in the manual?
Details Spectracom's warranty for products, covering defects in material and workmanship.
Outlines the process for submitting warranty claims, including required information and return authorization.
Information on purchasing extended warranty periods beyond the standard coverage.
Defines key terms and acronyms used in the SAS-E user manual.
Instructions for verifying received materials and inspecting for transit damage.
Visual representations of the SAS17E and SAS36E system architecture and signal flow.
Provides physical dimensions and weight for SAS17E (1U) and SAS36E (2U) models.
Details the physical connectors, indicators, and controls on the front and rear panels.
Describes AC and DC power input specifications, fuses, and consumption.
Details the connectors and electrical characteristics for various input signals.
Details the connectors and electrical characteristics for various output signals.
Describes the urgent and non-urgent alarm outputs, including relay contact ratings.
Covers Ethernet port specifications and operating conditions like temperature and humidity.
Lists the electromagnetic compatibility standards the SAS-E complies with.
Guide to powering the unit and establishing an initial network connection.
Instructions for using the web interface to configure signal monitoring and channel selection.
Explains how to interpret status LEDs on the front panel for system monitoring.
Details the conditions that trigger urgent and non-urgent alarms.
Procedure for safely shutting down the SAS-E unit.
Navigating the welcome page and accessing system setup options.
Interpreting system status, input/output, power, and alarm states via web interface.
Configuring network parameters, admin password, and SNMP traps.
Configuring system time, logging events, and accessing diagnostic tools.
Guide to performing software and firmware upgrades through the web interface.
Procedures for performing software or hardware system reboots.
Information on the Management Information Base (MIB) elements for status and setup.
Setting up SNMP traps for events like alarms and configuration modifications.
Instructions for updating the SAS-E software/firmware via web pages.
Chronological record of changes and updates made to the SAS-E documentation.
Details Spectracom's warranty for products, covering defects in material and workmanship.
Outlines the process for submitting warranty claims, including required information and return authorization.
Information on purchasing extended warranty periods beyond the standard coverage.
Defines key terms and acronyms used in the SAS-E user manual.
Instructions for verifying received materials and inspecting for transit damage.
Visual representations of the SAS17E and SAS36E system architecture and signal flow.
Provides physical dimensions and weight for SAS17E (1U) and SAS36E (2U) models.
Details the physical connectors, indicators, and controls on the front and rear panels.
Describes AC and DC power input specifications, fuses, and consumption.
Details the connectors and electrical characteristics for various input signals.
Details the connectors and electrical characteristics for various output signals.
Describes the urgent and non-urgent alarm outputs, including relay contact ratings.
Covers Ethernet port specifications and operating conditions like temperature and humidity.
Lists the electromagnetic compatibility standards the SAS-E complies with.
Guide to powering the unit and establishing an initial network connection.
Instructions for using the web interface to configure signal monitoring and channel selection.
Explains how to interpret status LEDs on the front panel for system monitoring.
Details the conditions that trigger urgent and non-urgent alarms.
Procedure for safely shutting down the SAS-E unit.
Navigating the welcome page and accessing system setup options.
Interpreting system status, input/output, power, and alarm states via web interface.
Configuring network parameters, admin password, and SNMP traps.
Configuring system time, logging events, and accessing diagnostic tools.
Guide to performing software and firmware upgrades through the web interface.
Procedures for performing software or hardware system reboots.
Information on the Management Information Base (MIB) elements for status and setup.
Setting up SNMP traps for events like alarms and configuration modifications.
Instructions for updating the SAS-E software/firmware via web pages.
Chronological record of changes and updates made to the SAS-E documentation.
General| Brand | Spectracom |
|---|---|
| Model | SAS36E |
| Category | Switch |
| Language | English |
