Spectracom TimeView 400 8177

To Next Page

TimeView 400 Display Clock

Model 8177

Instruction ManualInstruction Manual

Instruction Manual

Spectracom CorporationSpectracom Corporation

Spectracom Corporation

101 Despatch Drive

East Rochester NY 14445 USA

PHONE: +1.585.381.4827 FAX: +1.585.381.4998

wwwwww

www

.spectracomcorp.com mailroom@spectracomcorp.com.spectracomcorp.com mailroom@spectracomcorp.com

.spectracomcorp.com mailroom@spectracomcorp.com

Rev. 1.4

September 2002

2002 Spectracom Corporation.2002 Spectracom Corporation.

2002 Spectracom Corporation.

in any form without the written permission of Spectracom Corporation.

Main Page

Need help?

Do you have a question about the Spectracom TimeView 400 8177 and is the answer not in the manual?

Summary

SECTION 1 GENERAL INFORMATION

1.0 Introduction

Overview of the Spectracom Model 8177 TimeView 400 synchronized display clock.

1.1 Features

Details the key features of the TimeView 400, including display visibility and synchronization capabilities.

1.2 Warranty Information and Product Support

Provides contact information for warranty claims and technical support.

1.5 Specifications

Technical specifications for the TimeView 400, including RS-485 input and power requirements.

SECTION 2 INSTALLATION

2.1 Mounting Instructions

Steps and tools required for mounting the TimeView 400, including duplex outlet installation.

2.2 Preparation for Use

Configuration selections for the TimeView 400 using DIP switches, including time zone offset.

2.3 Synchronization Connection

Details how to connect the TimeView 400 to NetClock/2 and GPS Master Clocks or TimeBridge.

2.5 Connection to a Computer

Enabling computer set operation and connecting the TimeView 400 to a PC.

2.6 Manual Set Procedure

Procedure for manually setting the TimeView 400 as a stand-alone display clock.

SECTION 3 OPERATION

3.0 Introduction

Overview of the TimeView 400 display, rear panel functions, and computer setting information.

3.1 Display

Details the TimeView 400 display characteristics, including digit size and brightness adjustment.

3.2 Rear Panel Functions

Describes the rear panel connectors and controls, including RS-485 interface and setup switches.