4Spectrum Business Modem
Device Wall Mount Instructions
You can mount the modem on a wall using the included wall mounting kit. Two round or pan head
To mount the device on a wall:
1. Secure the bracket provided in wall mounting kit to the wall using the 2 wall anchors and screws.
2. After the wall bracket is secure, place the device on the wall bracket. The device should snap into place.
3. There are 2 locking screws on the bottom of the bracket to secure the device to the bracket.
Note to CATV System Installer:
This reminder is provided to call the CATV systems installer's attention to section 820-93 of the National Electric
Code, which provides guidelines for proper grounding and in particular, specify that the Coaxial cable shield shall
be connected to grounding system of the building, as close to the point of cable entry as practical.
To Next Page
Loading...
