RESET - To reset a digit, push “RESET” switch then the function switch to be reset.
MODE – Pressing this switch will display the sport mode number in the last digit of the clock
display. If the sport is Baseball, the number will appear in the Innings display.
FOOTBALL OPERATION (#1)
DOWN/QUARTER- Enter a number on the numeric keypad, then press the switch labeled
“YARDS TO GO”. The yards to go display will automatically reset to 10 on 1
st
down.
ADDITIONAL FEATURES FOUND ON ADVANCED FOOTBALL MODELS
BALL ON – Enter a number on the numeric keypad, and then press the switch labeled “BALL
ON” (maximum read-out is 50).
BALL POSSESSION- The lighted football on the scoreboard, indicating which team has the ball,
will change from the home to visitor side each time this switch is pressed.
HORN – When time runs out (@ 0:00), the horn will blow, if the horn is on. A red light beside
the “HORN” switch indicates when the horn is on.
TIME OUTS LEFT – This function will start out at 9 and decrement by 1 each time the switch is
pressed.
TRACK- Display the tenths and hundredths of second of an event by pressing “TRACK”. The
clock must be in the up counting mode and the clock must be turned off to display this time.
BASKETBALL OPERATION (#2)
BONUS – Push the home or visitor bonus switch to turn the bonus shot indicator on/off. The
bonus light will automatically come on after the opposing team accumulates 5 fouls. This
number can be changed by entering a new number on the keypad, then pressing “2” then pressing
entering a new number on the keypad, then pressing “2”, then pressing the switch labeled
“UPDATE”. For example, to change the auto-bonus number to 7-team fouls press these switches
in the following order “7” then “2” then “UPDATE”
This update will remain until the control console is unplugged.
BALL POSSESSION – (“POSS”) pushing this switch changes the possession indicator light from
home to visitor.
PERIOD – Each time this switch is pushed the period indicator on the scoreboard will advance by
one.
To Next Page
Loading...