Speechi SPE-VA460 - Menu and Settings Configuration

How to Use
© Speechi
User Manual l SPE-VA460
12
3. After manual zooming, pressing the "HOME
button" will restore the image to its original
position.
5
Up, down, left, right
Click the directional buttons to adjust the position.
6
Answer Call
If the device is in Bluetooth mode, click the button
to answer the incoming call.
7
Microphone muted
When the device is connected to Bluetooth and an
incoming call is on the way, click the button to
mute the microphone, then the device indicator
light turns red. Click the button again to unmute.
8
Rejected the incoming call
When the device is connected to Bluetooth, click
the button to reject the incoming call.
9
Volume up/down
Click the button to adjust the speaker volume.
10
Set/call out preset #1
Press and hold 3 seconds to set preset and short
press it to call out the preset.
11
Set/call out preset #2
Press and hold 3 seconds to set preset and short
press it to call out the preset.
12
Zoom in/out
Click the button to zoom in/out the image.
3.2. Menu Setting
3.2.1. Main Menu
Press menu key on remote control, and use arrow to point item to be selected.