What to do if Speed Queen frontload won’t fill?
- IIsabel YoderJul 31, 2025
If your Speed Queen washer isn't filling, try these steps: First, ensure the power cord is fully plugged into the electrical outlet. Next, check that both the hot and cold water faucets are turned on. Also, make sure the fill hoses aren't kinked or twisted. Press and hold the start button for two seconds to start the washer. Verify that the controls are set correctly and the loading door is tightly closed. Check the house fuse or circuit breaker. Finally, clean the screens in the water mixing valve and the filter screens at the faucet end of the fill hoses.